Portfolio
Sapphire Cluster Ring
Bespoke Ring
This cluster ring was created in collaboration with the customer.
We were able to sit down together to select the sapphires and also play around with different arrangements until we found the ideal one.
After modelling all the stones individually and designing the ring in CAD, the piece was then finished off with two small round brilliant-cut diamonds and set in solid 14K yellow gold
Peridot Martini Ring
Custom Cocktail Ring
Customer shared some inspiration for an olive martini ring.
I built on the idea using a section of the bezel to create the olive pit. The peridots were also her birthstone which was a nice touch.
I added a small orange pear cut sapphire into the toothpick for a contrast of colour.
The ring was designed in CAD and cast in solid 9K yellow gold.
Birthday Bi-colour toumaline ring
Bespoke Ring
This ring was designed in collaboration with my brother for our mother's 60th birthday.
We centered the design around this stunning bi-colour toumaline. The unique, organic shaped halo is pave set and is connected to the center stone with wires with a variety of bezel set diamonds and various coloured stones (topaz and emerald).
The ring was designed in CAD, cast in solid 14K white and yellow gold.
Pearl birthstone ring
Custom Birthstone Ring
Customer was looking for a unique birthstone ring that featured multiple pearls.
I had the idea to create a 'wave' of pearls that would run smoothly over her finger, which gave the appearance of champagne bubbles or caviar.
The ring was designed in CAD with screws to allow the pearls to be attached on with glue.
Portrait Cut Sapphire Ring
Bespoke Ring
Customer was after a unique ring for their partners birthday.
After finding inspriration in a previous design of mine, we set out to find a unqiue center stone.
I was thrilled when they agreed to work with this stunning portrait cut sapphire, which meant we could create a unique gallery that could be seen through the stone.
The ring was designed in CAD, cast in solid 14K yellow gold and set with two gypsy set diamonds.
Sapphire Cluster Engagement Ring
Bespoke Ring
Customer reached out to create a bespoke engagement ring and had a few ideas in mind they wanted to include.
After going back and forth around different styles and designs, we finally settled on a cluster of Australian sapphires with some small round, brilliant-cut diamonds to emphasis the blues and greens of the sapphires.
Once all the stones were modelled in CAD and the layout was decided on, the final ring was finished off in solid 18K yellow gold.
CAD designed custom brooch
Custom Brooch
This piece was done in collaboration with my brother for our dad's 60th birthday. This was some of the most challenging CAD work I have done to date and taught me a lot about not only what can be achieved in CAD, but also how to ensure the design is practical for jeweller to finish and set.
This piece was finished and set with lab diamonds in solid 9K gold.
The 'S' Ring
Custom Ring
This ring was inspired by my husband and started out as a little joke, which later turned out to be a very unique design.
After designing a few different versions in CAD, I finally found the ideal size to make the 'S' blend into the band seamlessly.
The ring was finished in Palladium-Silver - stronger than regular silver and highly resistant to tarnishing.
Laser Engraved Pendant
Custom Pendant
Customer was looking to recreate a pendant their partner had in solid 9K gold.
The unique coin style pendant's intricate design was modelled in CAD. Then the pendants were made by hand and then, utilising the CAD design, laser engraved in to ensure the intricacies were all captured.
Cushion Cut Sri Lankan Sapphire Ring
Bespoke Ring
Customer was after a wide-style ring with a large cornflower blue sapphire. I was able to source this stunning 2ct Sri Lankan blue sapphire and create a design in CAD that suited the style she was after.
The ring also featured a patterned gallery underneath to allow more light in and to reduce the overall weight.
The final piece was finished in platinum.
Pear Cut Ruby Signet Ring
Bespoke Ring
Customer had returned from overseas and purchased this stunning pear cut ruby and were after a unique ring that would suit their style and personality.
They also wanted something sturdy to withstand daily wear. After a few design variations, I finally designed this signet-style ring in CAD, which was then finished off in solid 14K yellow gold
Pear Cut Chrome Tourmaline Ring
Solitaire Ring
The customer had some ideas and inspiration for this piece but was after a unique green stone, which we were able to source.
I was then able to take the customers inspiration to design this piece in CAD and create the final ring, set in solid 9K yellow gold.
Bezel Set Lepidocrocite Quartz Ring
Solitaire Ring
After sharing a photo of this unique lepidocrocite quartz stone I had purchased, this customer reached out to express their interest in having a ring made with it.
Being quartz, I wanted to ensure the stone was set securely in a bezel, but also allow plenty of natural light in to capture the unique inclusions that it has.
Once designed in CAD, this was then completed in solid 9K yellow gold